Tag Archives: Dielines

Curved Dielines and Warping Tutorial – Part 2 – Create Dieline for a Cup Package

Concept to Keyline

In part one of this tutorial series, I showed how to adapt your rectangular label artwork concepts to a curved printer dieline. Sometimes you aren’t provided a dieline, just a package sample. It’s quite possible to create curved artwork without a target dieline. You’ll need a physical sample of the package to measure. And make sure you have some string. I’ll explain later.

After measuring and doing a bit of math, you can build your own Target Dieline. Once this is complete, the rest of the process is exactly the same as part one. (more…)

Curved Dielines and Warping Tutorial – Part 1 – Fitting a Curved Dieline

Concept to Keyline

A couple months ago I received a question from a reader in response to a comment I left on a LinkedIn post:

I saw your comment regarding Adobe Illustrator design for conical cups. We use the same warp method you describe, but I have concerns about elements at the top of my design being more distorted than elements at the bottom. Particularly, I have a horizontally oriented logo that stretches a bit too much. I varied from your post in that I didn’t average the widths. Instead, I made a rectangle close to the width of the lower circumference and applied warp until the rectangle was nearly perfect to fit the die. I then designed within that rectangle and applied the warp.

This question was the genesis of this multi-part tutorial on Curving artwork to fit to cups or fitting a curved supplied dieline. I’ll address the reader’s particular question as well as raise and address several others. (more…)