All posts by Robert

Curved Dielines and Warping Tutorial – Part 2 – Create Dieline for a Cup Package

Concept to Keyline

In part one of this tutorial series, I showed how to adapt your rectangular label artwork concepts to a curved printer dieline. Sometimes you aren’t provided a dieline, just a package sample. It’s quite possible to create curved artwork without a target dieline. You’ll need a physical sample of the package to measure. And make sure you have some string. I’ll explain later.

After measuring and doing a bit of math, you can build your own Target Dieline. Once this is complete, the rest of the process is exactly the same as part one. (more…)

Curved Dielines and Warping Tutorial – Part 1 – Fitting a Curved Dieline

Concept to Keyline

A couple months ago I received a question from a reader in response to a comment I left on a LinkedIn post:

I saw your comment regarding Adobe Illustrator design for conical cups. We use the same warp method you describe, but I have concerns about elements at the top of my design being more distorted than elements at the bottom. Particularly, I have a horizontally oriented logo that stretches a bit too much. I varied from your post in that I didn’t average the widths. Instead, I made a rectangle close to the width of the lower circumference and applied warp until the rectangle was nearly perfect to fit the die. I then designed within that rectangle and applied the warp.

This question was the genesis of this multi-part tutorial on Curving artwork to fit to cups or fitting a curved supplied dieline. I’ll address the reader’s particular question as well as raise and address several others. (more…)

New Design Gear for 2016

Eizo CG318-4K Dsiplay

You may have seen my previous post Houston, the Pencil has Landed where I wrote about my first few days with the new iPad Pro and Apple Pencil.

I must confess: I’ve been holding back on writing about ALL my new gear. Being the end of the year, its a good time tax-wise to purchase or lease some new equipment. I made two other big acquisitions:

  1. MacBook Pro 15″ with Retina Screen – This MacBook Pro was upgraded with the discreet AMD video card and a full 16GB of RAM. This is the top-end configuration of the current MacBook Pro line. My 2012 MacBook Pro (the same one I dumped coffee into a while back) was unable to run #2 on this list, not to mention the Bluetooth had failed.
  2. Eizo 4K DCI 30″ display – This is even higher res than the 4K UHD displays you see around. DCI 4K has an extra 256 pixels in the horizontal dimension. This display also sports a 10 bit per channel data stream, allowing the Mac to send higher-fidelity color per pixel, which is then processed through the hardware calibration of the display itself.

(more…)

It’s a Plaid, Plaid World this Fall at Target

The news is out. The project I’ve been working on with KNOCK Inc. this spring was made public on Target’s website today. (Sorry, wasn’t really today, Aug 9, I found this post sitting in my drafts folder and figured better to publish late than never…)

KNOCK has been working on Packaging and In Store Marketing (ISM) for the Designer Partnership with Adam Lippes.

(more…)